CLEANING & STORAGE
Cleaning
•
Proper and regular cleaning ensures safe use and extends the tools’
life.
•
To avoid electric shock or burns, switch off the tool and allow it to
cool down before performing cleaning and maintenance.
•
Before each use, inspect the device for obvious defects. Ensure the
covered and guards are undamaged and correctly fitted.
•
Clean the tool with a dry cloth or blow it with compressed air.
•
Carefully clean the blades after each use. Rub the blades with a
cloth soaked in oil or spray them with a metal spray.
•
Blunt bent or damaged blades must be replaced. Only use original
spare parts.
•
Store the blades in the cover.
•
It is recommended to clean the tool immediately after each use.
•
Ensure water does not get inside the tool.
•
Do not use any cleaning alkaline, abrasive, or disinfectant chemicals
as they may adversely affect the surface of the tool.
Repair
•
This tool contains no user-serviceable parts. Do not repair the tool
yourself. See the spare parts/repair section on the next page.
Storage
•
Clean the tool in accordance with the instructions.
•
Always store the tool in a dry, aired location out of reach of children.
•
Protect the tool against vibrations and shock during transport.
