Starting the Machine
Switching On/Off
To switch on, press the switch (5) of the rear handle and the
switch (4) of the front handle with both hands at the same time.
To switch off, release one of the switches.
Cutting Hedges
Before starting work, select branches with a diameter bigger than
20mm and cut them with a pruning shear.
A trapezoidal cut corresponds to the natural growth of plants and
results in optimal hedge growing.
First, cut the sides from bottom to top. Cut the upper part giving it
the shape you prefer, in a straight horizontal form, roof-like or
rounded.
The safety blade has laterally rounded and staggered cutting
teeth to reduce danger of injury. The additional shock protection
avoids inconvenient kickback when the blades come into contact
with walls, fences, etc.
If the blades are jammed or blocked by obstacles, switch off the
motor immediately, pull the plug and wait for the blades to
completely stop. Then remove the blockage.
Caution! Metal obstacles, such as fences, will cause damage
to the cutting blades.
Always keep your extension cord behind your back and start
cutting at the point nearest the socket. Plan your working
direction.
