Storage and Maintenance
Before carrying out any maintenance operations, disconnect the
plug from the power supply.
Check your machine regularly before starting work.
Damaged cutting blades must be replaced or repaired by a
professional.
After each cutting operation, clean the cutting blade with a soft
brush and cloth with lubricating fluid oil and spray a thin layer of
protective oil.
Always keep the ventilation slots in the motor housing clean.
Never clean or spray the machine with water. Only clean with a
moist cloth and never use detergents or solvents as this can
damage the plastic parts of the machine.
Finally, dry the motor housing carefully.
Store the machine with the supplied protection cover.
Spare Parts and Repairs
To order replacement parts, please go to
www.nettadirect.com/parts.
You will need PDC information from your product, user manual or
carton box. Alternatively, go to our website and use search bar to
find the parts available.
You can also find this code on the back of this User Manual.
For our Repair Service, please contact our customer support by
emailing support@nettadirect.com.
