General information
3
1
General information
Before installing the NTP read these instructions carefully. It is the basis
for any action when dealing with the NTP, and may be used for training
purposes. The instructions should be subsequently stored at the operation
site.
The target group for these instructions is technical staff, who have basic
knowledge in pneumatics and mechanics.
Therefore, only staff who are trained in these fields may work on the NTP.
The NTP may only be installed, put into operation, maintained, troubleshot
and disassembled by persons authorised by the operator.
This documentation is protected by copyright.
Netter
Vibration
reserves all rights such as translations, reprinting and re-
production of the instructions, as well as parts thereof.
All technical information, data and instructions for installation, operation
and maintenance in these instructions are based on the latest information
available at the time of printing and take our past experience to the best of
our knowledge into account.
No claims can be derived from the information, illustrations and descrip-
tions in these operating instructions.
The manufacturer does not assume liability for damages resulting from:
•
failure to observe the instructions,
•
improper use,
•
unauthorised repairs,
•
technical modifications,
•
use of non-permissible spare parts.
Translations are made to the best of our knowledge.
Netter
Vibration
does not assume liability for translation errors, even if the
translation was made by us or on our behalf. Only the original German text
remains binding.
The pneumatic linear vibrators of the series NTP comply with the EC Ma-
chinery Directive 2006/42/EC.
In particular, the standard EN ISO 12100 has been observed.
Use and
storage
Target group
Copyright
Limitation of
liability
Directives /
standards
observed
Summary of Contents for NTP 18
Page 21: ...Annex 21 12 Annex ...
