13
info@solidworks.com
Model:
Netti Dynamic System
Language:
English
Version:
2021-03
My-Netti.com
The chair back position is defined by the chair back
cylinder. There are two different type of cylinder
available for the Netti Dynamic System:
OPTION 1:
NETTI DYNAMIC 15° MOVEMENT
BACK SUPPORT CYLINDER 15
°
is never fixed /
locked but allows for a 15° flex at any position where
the chair back has been reclined to. The cylinder
is suitable for users with open kinetic chain (OKC)
movements with max extension less than 15°. If 15°
closes the kinetic chain movement, more forces will
have impact on the leg support.
The leg support might break if it is not
correct adjusted meaning that the user leg
extension reaches the end of the leg support
dynamic area, or if the user has slid forward.
Netti Dynamic System wheelchair with Netti
Dynamic 15° movement back support
cylinder is not approved for being used as a
seat in a vehicle.
Netti Dynamic 15° movement back support
cylinders are available in 80, 120 and 160 N
force.
The recline function is controlled by the
recline handle on the bar behind the back
support. This cylinder is NOT lockable.
ASSESSMENT AND CHOICE OF
NETTI DYNAMIC BACK SUPPORT
GAS CYLINDER
