23
info@solidworks.com
info@solidworks.com
info@solidworks.com
info@solidworks.com
Model:
Netti Dynamic System
Language:
English
Version:
2021-03
My-Netti.com
ARM SUPPORT
When the user is to leave the chair, the arm support
can be removed or swung away, depending on
which type of wheelchair you have. This makes the
transfer much easier.
Please, see the illustration of a chair with swing-away
arm support.
LEG SUPPORTS
Netti Dynamic leg supports are mounted like this:
•
Push the leg support fixing bolt vertical into the
extension piece on the wheelchair – keeping the
leg support slightly turned outwards. The leg
support will fall in place and turn into place itself.
•
To remove them: Unlock the foot plate.
•
Pull the leg rest slightly upward and swing it
outwards before lifting and detaching it from the
chair.
FOOT BOARD LOCK
With both leg supports in place, let the foot board
swing down and put the bolt into the lock, see
picture below:
