27
FIXED
DYNAMIC
info@solidworks.com
Model:
Netti Dynamic System
Language:
English
Version:
2021-03
My-Netti.com
OPERATING RECLINE HANDLE:
RECLINING THE CHAIR BACK
Press the right handle and put pressure to the push
bar to recline the back with one of your hands, while
you have eye contact with the user and put the
other hand on the arm support.
Wherever you let the handle loose, the
chair back will stay fixed and locked.
Wheelchair with Netti Dynamic 15°
movement back support cylinder will
however still allow for 15° degrees flexing.
The illustration shows a recline handle
position for a locked back.
DYNAMIC BACK:
To have the back behave dynamic, you have to
activate the recline handle with the smaller, red
handle attached to it.
Pull the recline handle tight to the push bar, the red
handle automatically clics in. Let go.
The handle stays close to the push bar and the back
can be freely moved backwards.
To stop the dynamic recline, simply press the handle
again; the little, red handle is released and the back
is fixed.
The recline sign sits on the push bar, it looks like
this:
On the recline handle there is a label reminding you
that the back is behaving dynamic when the recline
handle is activated and that the back is fixed when
the handle is open.
