28
info@solidworks.com
info@solidworks.com
My-Netti.com
Model:
Netti Dynamic System
Language:
English
Version:
2021-03
DRIVING A WHEELCHAIR WITH NETTI
DYNAMIC SYSTEM
When driving a wheelchair with
Netti Dynamic
System
, careful driving is mandatory.
Watch out for obstacles that could be in the reach
if the dynamic parts of the wheelchair is fully
extended. Otherwise the user, third parties or
surroundings may get hurt.
Always obtain good balance of the chair
as it may be challenged when suddenly full
extension happens.
SAFETY GUIDELINES WHEN LEAVING A
USER IN THE WHEELCHAIR
If you are leaving a user in a wheelchair, make sure
that the brakes are locked, the anti-tips are active
and that harnesses (when used), are closed.
WHEELCHAIR USED AS SEAT IN A CAR
See chapter 6 – Transport and User manual U0131
how to use a wheelchair as a seat in a car.
When a wheelchair with Netti Dynamic
System is to be used as seat in a car, make
sure that all dynamic functions are locked:
•
The leg supports are locked in vertical position.
•
The seat plate is locked.
•
The back support is locked in an upright position.
All to make sure the user does not hurt himself or
others by sudden involuntary movements.
Make sure the user is secured as described in the
user manual for the wheelchair.
The wheelchair is to be fixed in the car as
described in the user manual for the static
comfort wheelchairs (Netti III, Netti 4U CED,
Netti MOBILE.
MAX USER WEIGHT 135 kg
when used as a seat in a vehicle.
Netti Dynamic System wheelchair with
Netti Dynamic 15° movement back support
cylinder is not approved for being used as a
seat in a vehicle.
LIFTING THE WHEELCHAIR
•
Avoid lifting a wheelchair with the user in it.
•
Always lift a wheelchair holding on to the marked
lifting points on the frame.
•
Keep a sturdy, well balanced stand lifting from
your legs.
•
Never lift alone.
•
Never lift a wheelchair in its leg support or arm
supports.
