Installation instructions Universal Device Rack Netti III Comfort HD / XHD / Mini SW 35
MD 0167UK Installation instructions - Universal device rack
08-2018
My.Netti.com Page 9 of 10
10. Dimensions and data
11. Basic configuration of the Netti III HD / XHD for use with the universal device rack
The universal device rack is compatible with Netti III Comfort HD / Netti III Comfort XHD and Netti Mini SW
35 cm wheelchairs when equipped with the following accessories.
•
Wheelbase extension
•
2 reinforced wheels (not necessary for Netti Mini SW 35 cm)
•
Seat tilt with 2 gas springs (not necessary for Netti Mini SW 35 cm)
12. Maximum load
Please note that the entire load on the wheelchair including the user, any accessories, the universal device
rack, and other equipment, must not exceed 160 kg (Netti Mini = 90 kg).
13. Important note
A copy of these installation and operating instructions must be given to the
user of the wheelchair and their carers.
Warning, make sure that the anti-tips are always swung downwards and
locked while the chair is being used.
The wheelchair with Universal device rack is not approved
for being used as a seat in a car.
Protective cover
Depth:
193 mm
Width:
Seat width less 37mm
Height: 237 mm (free space)
Ready for a 2 l oxygen cylinder with a 115
mm diameter holder in platform and a cut-
out in protective cover or a LOX container.
Universal device rack
Depth:
348 mm
Width:
Seat width less 36mm
Edge height of retaining brackets: 60 mm
Maximum load 10 kg
Material: Aluminum powder coated in black
Universal device racks and protective covers are available only for the following wheelchairs
Netti III HD in seat widths of 35, 38, 40, 43, 45, 50, 55, & 60 cm
Netti III XHD in seat widths of 50 & 75 cm and Netti Mini SW 35 cm
