NetUP Streamer HDMI 8-24x v3. User manual
10
Chapter 3 WEB NMS Operation
Streamer HDMI 8-24 v3 does not support front buttons and LCD, users can only control and set the
configuration in computer by connecting the device to web NMS Port. User should ensure that the
computer’s IP address is different from the Streamer’s IP address; otherwise, it would cause IP
conflict.
3.1 login
The default IP address of this device is
192.168.0.136
.
Connect the PC (Personal Computer) and the device with net cable, and use ping command to
confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0
to 255 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the Encoder’s IP address in the browser’s
address bar and press Enter.
It will display the Login interface. Input the Username and Password (Both the default Username and
Password are “admin”.) and then click “LOGIN” to start the device setting.
3.2 Operation
When we confirm the login, it will display the WELCOME interface.