NetUP Streamer HDMI 8-24x v3. User manual
14
Chapter 4 Troubleshooting
Prevention Measure
⚫
Installing the device at the place in which environment temperature between 0 to 45 °C
⚫
Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if
necessary
⚫
Checking the input AC within the power supply working range and the connection is correct
before switching on device
⚫
Checking the RF output level varies within tolerant range if it is necessary
⚫
Checking all signal cables have been properly connected
⚫
Frequently switching on/off device is prohibited; the interval between every switching on/off
must greater than 10 seconds.
Conditions need to unplug power cord
⚫
Power cord or socket damaged.
⚫
Any liquid flowed into device.
⚫
Any stuff causes circuit short
⚫
Device in damp environment
⚫
Device was suffered from physical damage
⚫
Longtime idle.
⚫
After switching on and restoring to factory setting, device still cannot work properly.
Maintenance needed
