NetUP Streamer 16xC. User manual
5
Installation guide
Device’s installation flow chart
Before installing and connecting the device, carefully read the environment and
grounding requirements, as well as safety instructions for the sake of your safety and for
the safety of the device
Packing list check
Check items according to packing list. Normally it should include the following items:
•
NetUP Streamer 16xC
•
Power Cord
Safety instructions
•
Before installing and connecting the device make sure that the device
was damaged during
delivery.
•
Install the device in an
appropriate
place. The device is designed to work in a clean and dry room.
It must be operated and maintained free of dust.
•
Before
switching on the device make sure that it is adjusted to the mains voltage you intend to
use. Make sure that you keep within the specifications –
AC 100V
-
220V±10%, 50/60Hz.
•
Check that all the cables are connected properly
.
Connect cables only to a device
that is turned
off.
Packing list
check
Connecting
grounding
wire and
power cord
Installing
device
Connecting
signal cable
Setting
parameter
Running
device
