NetUP Streamer HDMI 1x v2. User manual
10
Main Menu
System
System
Save Config
System
Restore
System
Lock Keyboard
System
Product ID
System
Version
Save Config?
Yes ►No
Restore
Yes ►No
Lock Keyboard
Yes ►No
Product ID
003556000012
Encoder Modulator
SW:x.xx HW:x.xx
Main Menu
IP Stream
IP Stream
Enable
IP Stream
IP address
IP Stream
Port
IP Stream
Protocol
Enable
ON OFF
System
Factory Reset
System
LCD Time-out
Reset all sets?
Yes ►No
LCD Time-out
►5s
►10s
►30
►45
►90s
System
Key Password
Set Password
000000
Main Menu
USB Device
USB Device
USB Stature
USB Device
Play
USB Device
Record
Record
Record enable
Record mode
Record name
Reocord siz
USB Device
Remove USB
USB Stature
0/0Mb
Play
File enable
Play mode
Play list
Remove USB
Yes ►No
14
15
16
18
21
23
24
25
27
17
35
IP address
224.2.2.2
Port
3333
Protocol
UDP RTP/RTSP
IP Stream
Pkt length
IP Stream
Null Pkt Filter
Null Plct Filter
ON OFF
IP Stream
RTMP enable
Pkt length
7
RTMP enable
ON OFF
19
20
22
Network
IP Address
Network
Subnet Mask
Network
Reset Password
IP Address
1092.168.0.113
Subnet Mask
255.255.255.0
Reset Password
Yes ►No
Network
Gateway
Network
Mac address
Gateway
192.168.0.1
Mac address
202004101722
Network
Web Nms Port
Web Nms Port
80
28
29
30
31
32
33
26
34
36
37
38
Main Menu
Network
1)
IP address: 192.168.0.XX: the current IP address
2
) Alarm Status: For example, if the signal cable disconnected, it will display
Video 1 Not Lock
under this menu.
Uptime: It displays the working time duration of the device. It times upon power on.
3
) Video Parameters: User can enter the items respectively to check video status and input signal resolution. User can also
choose H.265/H.264 and set Video Bitrate, Low delay time, Rate Mode, H.264 Profile, and H.264 Level.
4
) Audio Bit rate: Select audio bit rate among 48, 56, 64, 80, 96,112, 128, 160, 192, 224, 256, 320, 384kbps.
Audio Format: Select audio format among MPEG2, MPEG2-AAC and MPEG4-AAC.
5
) Program Information: User can enable or disable the program output under menu
Program Output
. User can also enter
the other items to edit the
Service Name, Program Name, Program Number
, and PIDs of
PMT, PCR
,
Video
and
Audio,
and
edit LCN (Logical channel number).
6)
Standard: J.83A or J.83B for choosing.
