Chapter 15
Neobit 1012VA-II ADSL Ethernet Router User’s Guide
92
5. Click the Admin tab, and then click
Commit & Reboot
in the
task bar.
6. Click
to save your changes to permanent
memory.
Modifying and Deleting PPP Interfaces
To modify a PPP interface, display the PPP Configuration page and
click
in the Action(s) column for the interface you want to modify.
The PPP Interface – Modify page displays, as shown in Figure 39.
Figure 39. PPP Interface – Modify
You can change only the status of the PPP connection, the security
protocol, your login name, and your password. To modify the other
settings, you must delete the interface and create a new one.
To delete a PPP interface, display the PPP Configuration page and
click in the Action(s) column for the interface you want to delete.
You should not delete a PPP interface unless you have received
instructions to do so from your ISP. Without an appropriately
defined PPP interface, you will not be able to connect to your ISP.
You can recreate the PPP interface with the same name at a later
time.
After modifying or deleting a PPP interface, click
. Then,
Click the Admin tab, click
Commit & Reboot
in the task bar, and
click
to save your changes to permanent memory.
