Maintain twists within the Cat5e/Cat6/Cat7 cores up to the point of termination.
Maintain gradual bends when installing category cable, ensuring a minimum radius of 25mm where possible. Avoid sharp bends or twists
in the cable avoiding taught or stretched cable at all times.
When dressing the cable use moderate to low pressure, avoiding pinching of the cable jacket.
Do not splice, join or bridge the cable at anytime, as this will undoubtedly cause transmission issues.
Use moderate to low pressure when pulling category cable avoiding pressures in excess of 25 lbs (of force).
Keep category cable away from sources of EMI (electrical cables, transformers, light fixtures) ensuring a minimum parallel distance of
300mm, crossing at right angles if absolutely necessary.
Ensure cable is correctly tested, understanding that a basic continuity check may not be sufficient to identify issues or to certify cable
performance.
Always check local regulations relating to building and fire codes.
Advertised cable distances are there for a guidance. Many factors can effect
transmission distances including cable construction, quality, install
standards, patch panels, faceplates and external factors such as electrical
magnetic interference (EMI).
This product is designed to run over unshielded twisted pair Cat5e/6/7
cable. Some consideration is required when installing shielded (STP)
category cable ensuring all drain wires and shielding materials are correctly
grounded.
All RJ45 terminations should follow EIA/TIA-568-B terminations and not
simply wired Pin 1-1, Pin 2-2.The 568-B standard involves the splitting of
the green pair to pins 3 & 6.
BOX CONTENTS
Netvio HDBaseT TX & RX Device.
2x Wall mount brackets
1x Infrared receiver (capture) cables
1x Infrared emitter (sender) cables
1x 3-way screw termination connectors
WARRANTY INFORMATION
2-Year standard parts & labour warranty
FREE 3-Year warranty subject to product registration.
5-Year & 10-Year extended warranty options available.
Full warranty details including coverage, registration &
warranty extensions available at www.netvio.co.uk
Thank you for purchasing this Netvio product. The quick-start-guide is designed
to provide all required information to install your product successfully, ensuring
correct installation standards, therefore guaranteeing performance in
accordance with published features and specifications. Netvio therefore greatly
appreciates your time in reviewing the provided information and following our
recommended guidelines.
4K/60 HDR HDBaseT receiver over single category cable. Capable of
sending the latest bandwidth heavy sources over 40m when connected
to a compatible matrix device (see specifications for compatibility).
PRODUCT SUPPORT
Please contact your authorised Netvio reseller.
UK/EMEA Support | +44 (0) 870 488 7001
US Support | +833 720 0637
Email | support@netvio.co.uk
Live Chat | www.netvio.co.uk
RX-HT2-40-10_QSG_V1_290821
