DVR Server Manual
106
and press
will disconnect all connections. If DVR
Server’s channel is more than channels that you selected partition mode, you
can use
button to display DVR Server’s video in sequence. Pressing
button
will switch full screen mode and Right-Single-Click image can back
to normal mode.
5.2.2
Connection/Record Status
This icon indicates the current connection and their record status:
Gray: Not connected;
Navy blue: Connected with no recording;
Green: Connected with recording.
You can change the record status by pressing corresponding number
buttons or change status of all connections at the same time by pressing
button.
5.2.3
Partition Mode
You can set the partition mode by pressing a corresponding button on the
right of main interface. There are 6 partition modes as below:
——
1 partition mode;
——
4 partitions mode;
——
6 partitions mode;
——
9 partitions mode;
——
10 partitions mode;
——
16 partitions mode.
5.2.4
PTZ Control
Most functions of PTZ control are the same as
PTZ Control Panel
in DVR
Server.
5.2.5
Search/R-search
