DVR Server Manual
110
Chapter6
Mobile Client
Mobile clients in our software now support different kinds of mobile
phones, such as Nokia, BlackBerry and Iphone, etc. You can view any
cameras, including board card cameras and IP cameas supported by our
software, even megapixel cameras. And you don’t have to set dual-stream
now.
In this chapter, we will take normal mobile as an example to show you how
to operate and use the mobile client.
For how to download and install iPhone mobile client, please refer to
Download&Installation of MobileClient for iPhone.
For BlackBerry, if you can't connect to the DVR, please check your setup
of APN. Try the following steps: Option->Advanced option->TCP->APN:
1. Hit the menu button and select Setup;
2. Scroll down to "Enable Personal setting" and check that box;
3. In APN field enter the name of your APN.
For how to use Andriod phones, please refer to the manual named
Mobileclient_Android.
6.1
Recommended Mobile Phone
Requirements
Before you run Mobile Client, please check if your mobile phone supports
JAVA and comply with following applicable standards:
CLDC version: CLDC-1.0
MIDP version: MIDP-2.0
Your mobile phone should have GPRS or CDMA to transport data;
Set Internet as the access point of your phone call;
When you want to view some megapixel cameras, the memory of your
mobile phone should be great.
Select “Enable” to allow the PDA to connect With DVR server in the
Network Setup
of the DVR system.
Note:
GPRS is charged by data flow, so shut down the MobileDVR application if
you do not need view cameras.
