DVR Server Manual
120
Appendix E: How to Use 3G
Function
For a DG camera supports 3G function, you can enable its 3G function in
our DVR software by checking the box in front of Enable 3G.
The steps to config 3G function are as below:
First of all, forward 3G server port to your router if you want to use 3G
function in WAN. The port is 6000 as default. You can change it to others.
The second is to visit the DG series IP camera via IE. Go to Network
Set->Basic Set and you will get the following interface. Fill the DVR IP in the
blank of Center URL on the bottom right. You can fill either LAN IP or WAN IP
here. But if you hope to use 3G function in WAN, you have to fill in the WAN IP.
Please note the Center Port NO. should be the same with the 3G Server Port
you set in the DVR server.
Note:
Don’t forget to check the box after “Auto Connect”. Otherwise, the IP
camera will not be able to login the DVR server automatically.
