DVR Server Manual
22
While instant playback is in processing, if you want to play it again, you
can select
Review playback
function. You can press
Space
key to switch the
play/pause status. In pause status, you can press key
→
or
←
to play next or
previous frame. When the screen plays, you can press
↑
and
↓
to control the
speed of playing, also, in play status you can press
→
or
←
to play in normal
speed or play it from the beginning again.
3.
Alarm Popup
Single-Right-Click video image area in main interface and select “Start
alarm popup” after you set “Alarm camera popup interval” in
System Setup
,
otherwise, it can’t be selected with gray. After that when there is a motion
detection alarm (set in
PTZ & Linkage Setup
and
Motion Detection Setup
) or
an alarm triggered by sensor (set in
Sensor Setup
), system will display alarm
cameras in sequence.
When you want to end this function, you can
Single-Right-Click video image area and select “Pause alarm popup”.
This function is also suitable for IP camera.
Note:
The three functions as above are suitable for both of the compression card
camera and the IP camera.
4.
Disk Record Status
Click this item to view the disk record status of your PC.
