DVR Server Manual
25
OSD includes time and channel name. In this screen you can press time
or channel name and drag them to where you want directly, after that you can
press
button to save and press
button to resume time
and channel name to default position.
7.
Send to TV Monitor
Send to Monitor: Send the current camera to the selected Monitor. Stay
Time: Select the time to stay.
When there is a NV42XXHFV card used in the system, there will be one
more video output port listed. For example, there will be 3 video ouput listed
when there are one NV4002MD and one NV4208HFV.
Note:
The 2 functions as above are only suitable for the compression card
camera. If you want to adjust the OSD, you can set it in
IP Camera Setup
remotely. And when you enable the decode function in the add IP device
interface,
Send to TV Monitor
is also available to IP devices.
8.
IP Camera Setup
For this function, it is only available when you Right-single-Click image of
IP camera.
It will be described in details in
IP Camera Setup
.
9.
Audio Chat to IP Cam
Press this tool bar, and then you can select the “Audio Chat to IP Cam”
function to chat with the IP Cam as bellow:
10.
IP Video Zoom in
If you press this tool bar, you select the image zoom out function, click the
