DVR Server Manual
42
The Sensitivity value bar is used to adjust the sensitivity of the area you
selected. The sensitivity value is smaller the motion detection is more
sensitive.
The motion value bar is used to set the minimum acreage of full screen to
trigger alarm. Its unit is percent, if the acreage of motion area exceeds the
setting value of the areas you selected, system will trigger alarm. The default
value of Sensitivity and Motion is 2 and 5%.
Note:
Motion sensitivity value will affect the accuracy of smart search.
I.
Add Mask
Press
button to set the area to be shielded. If there are some
areas that you don’t want to show, you can draw those areas with mouse till
they change to be black. You can set several cover areas. Press this button
again to finish adding.
II.
Delete Mask
Press
button to delete all cover areas.
1.4.6
Network Panel
This panel displays the network configuration of DVR system.
