DVR Server Manual
60
【
Selected Group
】
Select group number.
【
Record sub stream
】
Select the record sub stream enable or not, if you
select enable, you can view the sub stream in the NVR client
Re-search
.
The sub stream is main effect in searching the record file in client’s
re-search by the narrow bandwidth.
【
Selected Cameras
】
Select the cameras that the work mode of which
are the same in a group. Cameras include local board cards and IP modules.
【
Pre-Event Record
】
Select the start time of record when there is an
alarm. When DVR system is in Motion Detect mode or Sensor Detect mode, it
can record video before the alarm is trigged.
【
Post Record Time
】
Select the end time of record when there is an
alarm. When the system is in Motion Detect mode or Sensor Detect mode, it
can record video after the alarm ended.
【
Record Audio
】
Select whether program record audio data or not. This
setting is not available for IP Cameras, for stream type of IP Camera; you
should set it remotely in
IP Camera Setup
.
Recording Schedule Setup
(cameras of local board cards and IP
Cameras setting)
Tips:
One block of pane
means half an hour. Firstly, click record mode
icon
, then click schedule diagram, hold down the mouse and move it
to select large area (Drag & Drop).
1. Normal Record (green): DVR system always record video (e.g. Sun.);
2. Sensor Record (red): DVR system begins to record video only when
there are POS or ACU actions(e.g. Monday);
Note:
The time setup must be corresponding with Check Alarm setups in Sensor
setup otherwise it can’t work properly.
3. Motion Record (Blue): DVR system begins to record video only when
it detects moving object (e.g. Tuesday.);
