DVR Server Manual
65
【
Trigger DO Output
】
Select which DO ports will be triggered by above
camera alarms.
Schedule Setup
1. Motion & Video Loss (Red): DVR System responds with Motion
Detection and Video Loss alarm in specified time;
2. Motion Alarm (Blue): DVR System only responds with Motion
Detection alarm in specified time;
3. Video Loss (Yellow): DVR System only responds with Video Loss
alarm in specified time;
4. Not Check (gray): DVR System doesn’t respond with any alarms in
specified time.
Note:
Check Alarm Setup (including Motion & Video Loss, Motion Alarm and
Video Loss) does not take affection to Motion Detect Record. It is only alarm
setup. It takes affection to motion detect alarm out and motion detect alarm to
network.
2.5
E-mail & SMS Setup
Press
button to enter E-Mail setup:
Note:
Before you set the E-mail setup, you should pay attention to several points
as below:
The alarm that triggers E-mail sending includes two types:
Camera-related alarms (Motion detection alarm & Video loss alarm) and
Sensor-related alarms.
For Camera-related alarms, you should set
Motion Detection Area &
Cover Setup
and check alarm in
Motion Detection Relay
. For Sensor-related
alarms, you should set to check sensor and select cameras to be triggered in
Sensor Setup
.
When you enable system capture image as attachment of E-mail, the
system will capture a still picture of the alarm camera to be sent as an
attachment of the E-mail.
