DVR Server Manual
70
local board cards, system uses soft decoding to play to TV Wall, total channels
of them are not influenced by decoding channels. For IP cameras, system
uses hard decoding; total channels of them are influenced by decoding
channels. For different work modes (set in
IP Camera List
), the channels you
can use are different, the available certain channels must be the first certain
channels. If you disable hard decoding by setting in IP Camera list, you can’t
output real-time videos of IP cameras to TV Wall.
【
Video Switch Interval(sec)
】
Set interval that each window shows
cameras circularly when there are more than one camera in it.
Note:
1. One camera is only shown in one window once. But you can show
one camera in 2 windows through switching the
main camera channel
and
sub camera channel
. Also, you can show several cameras in one
window after you set the “Video Switch Interval”.
2. MD card can only decode the data of 40 series card and some IP
cameras. When it is used to decode 42 series card or Mega IP
cameras, there will be no data output.
2.6.2
Display Setup
【
Display Group
】
System operator can set groups of cameras to be
displayed for fast preview, including its display mode and cameras. Up to 16
groups can be set.
【
Video View Mode
】
Set the split mode, the split mode is same as main
window’s display split mode. There are1, 4,9,13,16,20,25,28,33,36,40,49 and
64 partition modes.
【
Video Window
】
【
Display Camera in the window
】
After selecting video
split mode, there will be corresponding windows, select one camera to be
showed in each window. The cameras include 64 cameras (the biggest of the
system limitation), when the total channels (cameras of local board card and IP
Cameras) are less than 64, some channels do not have image with black
window.
Note:
One camera is only showed in one window once, but each camera can be
displayed in any window discretionarily. E.g.: The 1
st
camera has been
displayed in window1, and the 2
nd
camera has been displayed in window2.
When change the 1
st
camera to be displayed in window2, the 2
nd
camera will
be exchanged in window 1 automatically.
