11
6. Installation
The device is waterproof.
The installation instruction is as the figure below.
1.The device can be fixed on the cover by the force rubber, or make the hole in the cover and bundle the device with cable ties.
2. The length of the probe can be trimmed according to personal requirements.
3. When the level of the hand wash is lower than electrode rods, the device will issue a warning.
R720FLD R720FLO R720FU
L-type Probe- Electrode rods Downward L-type Probe- Electrode rods Upward U-type Probe
Installation method of water leakage detection device:
Place the device on the location where water leakage needs to be detected. If users need to detect water leakage on the ground,
please refer to the following figure.
R720FW
