background image

 

 

13 

8. Important Maintenance Instruction

 

The device is a product with superior design and craftsmanship and should be used with care.  

The following suggestions will help you use the warranty service effectively. 

 

• Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that can corrode electronic 

 circuits. In case the device is wet, please dry it completely. 

• Do not use or store in dusty or dirty areas. This way can damage its detachable parts and electronic components. 

• Do not store in excessive heat place. High temperatures can shorten the life of electronic devices, destroy batteries, and  

 deform or melt some plastic parts. 

• Do not store in excessive cold place. Otherwise, when the temperature rises to normal temperature, moisture will form 

 inside which will destroy the board. 

    • Do not throw, knock, or shake the device. Treating equipment roughly can destroy internal circuit boards and delicate 

  structures. 

• Do not wash with strong chemicals, detergents, or strong detergents. 

• Do not paint the device. Smudges can make debris block detachable parts up and affect normal operation. 

• Do not throw the battery into the fire to prevent the battery from exploding. Damaged batteries may also explode. 

 

All the above suggestions apply equally to your device, batteries, and accessories.  

If any device is not operating properly. 

Please take it to the nearest authorized service facility for repairing. 

 

Summary of Contents for R720F















Reviews: