background image

 

 

3.

 

Main Feature 

 

Compatible with LoRaWAN 

 

RA0715 and RA0715Y applies DC 12V adapters 

 

R72615 applies solar and rechargeable lithium batteries 

 

Simple operation and setting 

 

CO

2

, temperature and humidity detection 

 

Adopt SX1276 wireless communication module 

 

4.

 

Set up Instruction 

On/Off

 

Power On 

RA0715 and RA0715Y are connected to DC 12V adapter for power on. 

R72615 applies solar power and rechargeable lithium batteries. 

Turn On 

Connect with power on to turn on 

Restore to Factory Setting 

Press and hold the function key for 5 seconds, and the green indicator flashes 20 times. 

Power Off 

Disconnect from the power supply 

Note 

1.

 

The engineering test requires to write the engineering testing software separately. 

2.

 

The interval between on and off is suggested to be about 10 seconds to avoid the 

interference of capacitor inductance and other energy storage components. 

 

Network Joining

 

Never Join the Network 

Turn on the device to search the network. 

The green indicator keeps on for 5 seconds: success. 

The green indicator remains off: fail 

Had joined the network 

(Not in the original setting) 

Turn on the device to search the previous network. 

The green indicator keeps on for 5 seconds: success. 

The green indicator remains off: fail. 

Fail to Join the Network 

Suggest checking the device registration information on the gateway or consulting your 

platform server provider if the device fails to join the network. 

Summary of Contents for R72615












Reviews: