9
5-5. Emergency
After binding with IAS devices, press
to send emergency message to the network.
5-6. Arm/Disarm Security
After finding out CIE device (please refer to 5-1. Join the ZigBee Network), users area able to arm/disarm the
security through Z503.
Arm: While the security is disarmed, press and hold
for 3 seconds to arm the security. The
indicator will flash
once
.
Disarm: While the security is armed, press and hold
for 3 seconds to disarm the security. The
indicator will flash
once
.
5-7. Store Scene
1. Press and hold
or
or
or
for 5 seconds. The indicator flashes once and identify the
corresponding binding device for 120 seconds. Press and hold
for 5 seconds to control curtain 1 and
curtain 2 to identify for 120 seconds. Press and hold
for 5 seconds to control curtain 3 and curtain 4 to
identify for 120 seconds. As shown below:
2. Press and hold
or
or
for more than 3 seconds; the indicator flashes once to store the
scene.
Z503 will save the devices status of the network. The Indicator flashes 5 times after the setting is
completed; otherwise, it will not flash.