Introduction
NETVOX Z809B is a ZigBee Home Automation enabled power socket with level control
and power/energy/current/voltage consumption monitoring. It acts as a router device in
the Home Automation profile network. It can be manually switched through a soft on/off
switch or switched wirelessly through a paired remote controller. Consumption reading
can be captured and displayed on ZiG-BUTLER -Netvox application software, or on any
3
rd
party ZigBee enabled in-home display.
What is ZigBee?
ZigBee is a short range wireless transmission technology which defined for a minimum
complexity, low power consumption, low data rate, cost effective wireless solution. ZigBee
lies in between wireless markup technology and Bluetooth. ZigBee is based on
IEEE802.15.4 standard, the mutual co-ordination between thousands of sensors to
exchange data. Sensor to sensor or node-to-node communication is achieved through
relays of control data between devices with only a fraction of energy use which denoted
for highly transmission efficiency.
Note: Wireless communication, in some real use cases, can be limited by the signal
blockage. Please consult your service provider or place of purchase.
Product Specification
Fully IEEE 802.15.4 compliant (ZigBee
Pro)
Utilizes 2.4GHz ISM band, up to 16
channels
Up to 150 meters non-obstacle
wireless transmission distance
100~240VAC, 50/60HZ input power
Resistive load max: 3A/220VAC
Consumption monitoring range 50mA
to 3A, with ±1% accuracy
Up to 150 meters non-obstacle
wireless transmission distance
Simple operation and device
configuration
Operating Ambient: -10
o
C to 50
o
C / 5~85% RH
max.
Storage Ambient: -40
o
C to 85
o
C
