8
The command format is as following:
02
Cmd=0x0FFE
Len=0x11
Data
CRC
Mode
2:
Data
is
"www.netvox.com.cn"
hexadecimal
code.
Send
serial
command
"020FFE117777772E6E6574766F782E636F6D2E636ECB", when receiving the "021FFE0100E0" that it is
successful to change to mode 2.
The Gateway mode: Data is "WWW.NETVOX.COM.CN" hexadecimal code. Send serial command
"020FFE115757572E4E4554564F582E434F4D2E434ECB", when receiving the "021FFE0100E0" that it is
successful to change to Gateway mode.
5-4. Restore to Factory Setting
To restore it to factory setting, please follow the steps:
Step1. Power off ZL01A.
Step2. Press and hold the
Permit-join Key
.
Step3. Do not release the key and power on ZL01A to complete the restore.
6. Home Automation Clusters for ZL01A
A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A
simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table
lists the clusters which are supported by ZL01A.
1.End Point(s)
：
0x0A
2.Device ID
：
Combined Interface
（
0x0007
）
3.EndPoint Cluster ID
Server side
Client side
Mandatory
Basic(0x0000)
Identify(0x0003)
Commissioning(0x0015)
Diagnostics(0x0B05)
Optional
