32
Startup error messages
8191 4:1 Core to bus
ratio: processor cache
disabled
The CPU cache was disabled.
Replace the motherboard, as
described in “
Replacing the
motherboard
” on page 102. If the
problem persists, call Network
Appliance Customer Support.
8192 L2 cache size
mismatch
The expected and detected L2 cache
do not match.
8193 CPUID, processor
stepping are different
The expected and detected CPU
speeds are different.
8194 CPUID, processor
family are different
The expected and detected CPU
family are different.
8195 Front side bus
speed mismatch; system
halted
A bus error occurred. The expected
and detected bus speeds are
different.
8196 Processor models
are different
The expected and detected CPU
models are different.
8197 CPU speed
mismatch
The expected and detected CPU
speeds are different.
8300 Baseboard
management controller
failed to function
The baseboard management
controller failed.
8301 Front panel
controller failed to
function
The front panel controller failed.
Replace the system chassis, as
described in “
Replacing the
appliance chassis
” on page 106.
8305 Hot swap controller
failed to function
The hot swap controller failed—
C2100 only.
8420 Intelligent system
monitoring chassis
opened
N/A
Ignore this error message and
continue booting to the operating
system. If the system does not boot,
call Network Appliance Customer
Support.
84F1 Intelligent system
monitoring forced
shutdown
Error message or code
Description
Corrective action
Summary of Contents for C1200 NetCache
Page 10: ...x Preface...
