![background image](http://html1.mh-extra.com/html/network-appliance/fas200-series/fas200-series_hardware-and-service-manual_1675390102.webp)
90
Replacing a power supply
Installing a power
supply
To install a power supply, complete the following steps.
Caution
Do not use excessive force when sliding the power supply into your appliance.
You can damage the connector.
3
Lift up the clip lock and unplug the power cord from your appliance’s
power supply.
4
At the top of the rear of the unit, using your thumb and index finger,
press the cam mechanism levers toward each other to release the
power supply handle.
The following figure shows how to press the levers on the cam
mechanism and release the power supply handle.
5
Use the handle to pull the power supply out of the appliance.
WARNING
WARNING
When removing a power supply, always use two hands to support
its weight.
Step
Action
OPEN
OPEN
Step
Action
1
Put on the antistatic wrist strap and grounding leash.
2
Slide the power supply into the power supply bay until you hear the
power supply connect with the connector inside your appliance
chassis.
Summary of Contents for FAS200 Series
