![background image](http://html1.mh-extra.com/html/network-appliance/fas200-series/fas200-series_hardware-and-service-manual_1675390016.webp)
4
Connecting your appliance to a network
4
Connect the console cable to the console connection port at the far
right of the CPU module, using the DB-9 to RJ-45 console adapter.
For information about connecting a console cable, see “
your appliance to an ASCII terminal console
For FAS270—non-RoHS:
For FAS250—non-RoHS:
Note
The Reduction of Hazardous Substances (RoHS) version of the
FAS200 series uses a Small Form Factor Pluggable (SFP) module in
the tape backup port (left-most port). You must plug the SFP module
into this port before to cabling or terminating it.
Step
Action
Network
cable
DB-9 to RJ-45
console adapter
Fibre
Channel
terminator
Loopback
terminator
Network
cable
DB-9 to RJ-45
console adapter
Summary of Contents for FAS200 Series
