![background image](http://html1.mh-extra.com/html/network-appliance/fas200-series/fas200-series_hardware-and-service-manual_1675390023.webp)
Chapter 1: Connecting a FAS200 Series Appliance
11
8
Set the shelf ID to “1.” The disk shelf ID switch on the back of the
appliance differentiates the FAS270c from additional disk shelves
connected to the system. For the FAS270c, the default and
recommended setting for the ID switch is “1.”
Attention
Power to the appliance must be off before changing the thumbwheel
switch value. The change will take effect after power is restored to
the appliance. Do not change the thumbwheel switch ID value while
the power is on.
9
If you are…
Then…
Adding disk shelves to your
system
See “
Not adding disk shelves to
your system
See “
Step
Action
1
1
Shelf ID switch
Summary of Contents for FAS200 Series
