![background image](http://html1.mh-extra.com/html/network-appliance/fas200-series/fas200-series_hardware-and-service-manual_1675390086.webp)
74
Replacing the CPU module
4
Install the old CompactFlash card into the replacement CPU module
by orienting the card so that the pin slots on the card engage properly
with the pins inside the socket, and then gently sliding the card into
place until it is firmly seated in the socket.
Caution
Damage to the card socket and card can result if you do not orient the
card properly during insertion.
5
Install the blank CompactFlash card from the replacement CPU
module into the old CPU module and return the old CPU module to
NetApp.
6
Proceed to “
Procedures for installing the CPU module
install your replacement CPU module.
Step
Action
Summary of Contents for FAS200 Series
