14
UART
mode
2. TCP/IP mode
a. The matrix default DHCP is enabling, after powering up 3 minutes if network
router doesn
’
t assign an IP address to the matrix, it will use an IP address
(192.168.1.100) as default IP.
b. The matrix and the PC on the same network IP segment with network router
and the matrix work on the DHCP status. You need search IP and click the
connect button.
c. Configure the IP address manually, you can set others IP address and be
sure your PC is the same IP segment with Matrix. You can connect the matrix via
PC host software.
Summary of Contents for ND-66-B70
Page 1: ...3 ND 66 B70 6 6 HDMI 18Gbps over HDBaseT Matrix with Audio Matrixing VER 2 1...
Page 14: ...1 6...
Page 15: ...1 7...
Page 16: ...1 8 7 Connection Diagram...
