ADC-SDI-CC
Rev. 3
DATE: 23 July 2008
Network Electronics AS, P.O.Box 1020, N-3204 Sandefjord, Norway. Tel.: +47 33 48 99 99 – Fax: +47 33 48 99 98
E-mail: support@network-electronics.com – Web: http://www.network-electronics.com/
Technical specifications are subject to be changed without notice.
6
2. Specifications
Digital Serial Output
Signal type:
SMPTE 259M / ITU-R BT.601
Connector:
BNC
Impedance:
75
ohm
Return
loss:
>15dB
@
270MHz
Jitter:
<
0.2UI
Peak to peak signal level:
800mV
±
80mV
Composite and Y/C Input:
Signal type:
Composite video, PAL 625/50Hz or NTSC 525/60Hz
Y / C (S-video)
Connector:
BNC
Impedance:
75
ohm
Signal
level:
1Vp-p
Return
loss:
>40dB
Component and RGB Input:
Signal
rate:
625/50Hz
or
525/60Hz
Signal type:
RGB without setup, with separate sync.
SMPTE / EBU Y, Cr, Cb
Connector:
BNC
Impedance:
75
ohm
Signal level:
Y = 1Vp-p. Cb, Cr, R, G, B = 0.7Vp-p
Return
loss:
>40dB
Processing Performance:
Signal
path:
10
bits
Sampling:
27MHz,
2
x
oversampling
Luma/Chrome separation:
selectable 5 line adaptive comb filter or chroma trap filter
Video
bandwidth:
6MHz
Hue
Accuracy
0.5
°
typical
Colour Saturation Accuracy
0.8% typical
Luminance
Nonlinearity
0.6%
typical
SNR (
unified weighted)
:
66dB
typical
Diff.
gain:
<1.0%
Diff.
phase:
<1.0
°
Video processing delay
3 video lines
Power:
+5V
DC
/
2.75W
-15V
DC
/
0.5W
