ETH1000-D
Rev.
1
3 Configuration
ETH1000-D can be configured by DIP or from Flashlink GYDA-SC.
3.1 DIP control
The tables below explain the functionality of the dipswitches.
# Description
1. Enable 10Base-T
2. Enable 100Base-T
3. Enable 1000Base-T
4. Auto- negotiation on 1000Base-X
5. Reserved
6. Reserved
7. Reserved
8. GYDA override/DIP
When DIP switch 1, 2 and 3 are all on or off, speed is set to auto.
DIP switch 1 enables/disables 10Base-T electrical connection.
DIP switch 2 enables/disables 100Base-T electrical connection.
DIP switch 3 enables/disables 1000Base-T electrical connection.
DIP switch 4 enables/disables auto-negotiation on the optical connection, 1000Base-X.
When connecting ETH1000-D to ETH1000MC, auto-negotiation must be disabled. Using two
ETH1000-Ds, these DIPs must be in the same situation.
Dip 5, 6 and 7 are reserved.
network-electronics.com
|
6
