D-422-MG
Rev.
0
4
1
General
Figure 1 D-422-MG Block diagram
The flashlink D-422-MG module provides an economical solution for transmitting RS-422
and GPI data signals via fiber optic cable. A pair of D-422-MG allows bi-directional
transmission of up to 8 RS-422 and 16 GPI data lines for distances over 60km. When
access to fiber is limited, D-422-MG can be combined with the flashlink optical
multiplexing WDM, CWDM or DWDM products.
The D-422-MG module multiplexes up to 8 RS-422 and 16 GPI inputs into an outgoing
datastream while at the same time demultiplexing an incoming datastream into 8 RS-422
and 16 GPI outputs. The outgoing multiplexed stream is available both as an optical
signal and as an electrical signal for use with a flashlink multichannel DWDM system.
As stand alone unit, the D-422-MG module utilises 2 fiber strands for bi-directional data
transport. Using either 2 fiber strands or optical multiplexing technology guarantees
minimum possible latency for applications where timing is crucial. The D-422-MG module
is supplied together with the D-422-MG-C1 connector module. The optical output is
made with a Fabry-Perot laser diode for 1310±40nm or a DFB laser for 1550±40nm and
the CWDM wavelengths according to ITU-T G.694 from 1470±6nm up to 1610±6nm.
The product is available in 19 versions:
D-422-MG-13T -7.5dBm
1310±40nm -7.5 dBm F-P laser
D-422-MG-13T 0 dBm
1310±40nm 0 dBm F-P laser
D-422-MG-15T 0 dBm
1550±40nm 0 dBm DFB laser
