ArchiTech Cylindrical Lock & Surface-Mounted Networx Control Unit Mounting and Installation Instructions
16
14B. RUN THE OVAL PROXIMITY READER WIRES
From the outside ("unprotected" side) of the door, feed the
Proximity Reader
wires (plug sleeves are
orange
and
blue
) fully into the 5/8" diameter thru-hole to the inside ("protected" side) of the door.
Do not pinch wires.
14C. INSTALL OVAL PROXIMITY READER COVER
The
Oval Proximity Reader
cover "snaps" into place, as follows:
a. Hook the
Reader
on the
Left Tab
of the
Mounting Plate
.
b. Keep thumb pressure on left side.
c. Press firmly on the right side of the
Reader
until it
"snaps" into place.
Note:
A spare
Mounting Plate
and
Rubber Gasket
are provided if needed.
Be careful not to pinch any
wires.
FIG. 14B: FEED THE WIRES
INTO THE 5/8" DIAMETER
THRU-HOLE (FROM
"OUTSIDE" TO "INSIDE")
FIG. 14C
FIG. 14CC
