ArchiTech Cylindrical Lock & Surface-Mounted Networx Control Unit Mounting and Installation Instructions
20
19. MOUNT THE "SURFACE-MOUNTED NETWORX CONTROL UNIT"
Before mounting, we recommend feeding all of the previously connected wires back into the door.
a. Hook the top of the
Surface-Mounted Networx Control Unit
into the top of the
Control Unit Mounting Plate
and press the bottom until flush with the door surface.
b. Insert the Dog Point screw into the bottom of the
Surface-Mounted Networx Control Unit
(#6-32 Allen Head
countersunk U-cut Dog Point screw, part #SC681 as shown in Fig. 19). First thread this screw by hand using the
knurled head for grip, then tighten with the rounded head of the supplied Allen key.
FIG. 19: "DOG
POINT" SCREW
FIG. 19A: INSERT "DOG POINT" SCREW HERE
