9
ArchiTech Cylindrical Lock & Surface-Mounted Networx Control Unit Mounting and Installation Instructions
11. USING THE WIRING PLATE
The
Wiring Plate
is always installed on the inside ("protected") side door surface. Note also that the
Cylindrical Lock
Body
motor wire will run along the inside (" protected" ) side door surface.
11A.
Install the latch and secure with screws provided.
11B.
From the outside ("unprotected") side of the door, insert the
Cylindrical Lock Body
into the 2-1/8" diameter door chas-
sis hole (standard ASA 161 door prep) as detailed in its in-
stallation instructions provided with the unit.
IMPORTANT:
Ensure the
Cylindrical Lock
Motor Wire
runs to the inside ("protected") side of the door. Do not in-
stall the inside housing yet, as the
Wiring Plate
will need to
be installed first.
FIG. 11B: WIRE RUNS TO THE INSIDE
FIG. 11A: INSTALL LATCH
