12
Intelligent NIC Getting Started Guide — NDA Required
NetXen, Inc.
4. Detailed Installation and Configuration Instructions
9
Click on the
Driver
tab. The following information is displayed.
The driver can be updated from this window by clicking on
Update Driver
.
In addition, if there is a previous version of the driver on the system and the device
fails after updating to a new driver, click on
Roll Back Driver
to roll back to the
previously installed driver.
4.2.2
Uninstall Procedure
In the NetXen P2 NIC Adapter Properties window shown below, the device can be
uninstalled by clicking
Uninstall
. Clicking
Uninstall
performs the same operation as
described in Section 5.6.1.
Transmit IP Checksum Offload
This parameter is for enabling/disabling the transmit IP checksum
offload.
Registry Key: TxIPChecksumOffload
Default: ON
Values: ON/OFF
Transmit TCP Checksum Offload
This parameter is for enabling/disabling the transmit TCP and transmit
UDP checksum offload.
Registry Key: TxTCPChecksumOffload
Default: ON
Values: ON/OFF
VLAN ID
For setting the VLAN ID for this interface (also exposed through the
standard OID).
Registry Key: VlanId
Default: 0
(no VLAN)
Range: 0 - 4095
Table 5 Description of Advanced Properties Parameters (Continued)
Parameter
Description