background image

 

15 

5.6 Error Message  

If a fault occurs an error message will be displayed, accompanied by an audible tone. 

Press START/STOP to mute or turn the burner OFF by pressing  . 

ERROR MESSAGE 

SOLUTION 

(contact the Service Department if the solution does not eliminate 

the error) 

TEMPERATURE TOO HIGH 

Wait for the message (READY) to be displayed. 

DEVICE HIT 

DEVICE TILTED 

CO2 LEVEL TOO HIGH 

Ventilate the room to reduce the CO

level. Wait for the message 

(READY) to be displayed. 

WARNING CLOSE THE LID 

Do not fill the fuel. Close the fuel inlet lid. 

ERROR 01 

Fuel spillage has been detected. Turn the burner OFF by pressing 

 and disconnect the pump. Wipe the visible liquid and wait for a 

min. 1 hour. If the error is not eliminated, wait for min. 24 hours. 

ERROR 05 

The burner has been moved. Eliminate the source of shock. Wait 

for the message (READY) to be displayed. 

ERROR 06/16/17/20 

Turn the burner OFF  , wait for a min. 5 minutes and turn the 

burner ON. 

ERROR 15 

Turn the burner OFF   and level the surface on which the burner 

is installed. 

ERROR 21 

Turn the burner OFF  , wait for a min. 5 minutes and turn the 

burner ON. 

ERROR 

02/03/04/10/16/31/32/41/51/61 

Contact the Service Department. 

MAINTENANCE

  

NetZero burners are considered maintenance free, meaning they do not require regular servicing. To 
ensure the burner is in proper condition, the manufacturer suggests visually inspecting the condition 
of the nozzles on the flame rail while the burner is off. The nozzles should be round and regular. Any 

signs of corrosion on the flame rail, irregular flame pattern or any other erratic behavior of the burner 
should be immediately reported to the seller or distributor of the burner. 
Regularly clean the surface of the burner with a soft, dry cloth. While cleaning, please be aware that 
due to the design of the burner, the filament protrudes above the burner surface. If put to mechanical 
stress the filament may break. 
 
 
 
 
 
 

NetZero is a distributor of these products, which are designed and manufactured by Planika SP S O O. 

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE 
FACE HEREOF AND SUPPLIED MANUALS.  IMPLIED WARRANTIES OF 
MERCHANTABILITY, IMPLIED WARRANTIES OF FITNESS, IMPLIED WARRANTIES OF 
WORKMANSHIP AND OTHER IMPLIED WARRANTIES ARE EXCLUDED
 BY NETZERO.

 

Summary of Contents for AA-11-04745
















Reviews: