Neue SFO2SS, User Manual

Shelf supports

You can remove the shelf supports to clean the side
walls.

Removing the shelf supports

1

 Pull the front of the

shelf support away from
the side wall.

1

2

2

 Pull the rear end of

the shelf support away
from the side wall and re-
move it.

Installing the shelf supports

Install the shelf supports in the opposite sequence.

The rounded ends of the shelf supports must point
to the front.

Oven lamp

Warning!

 Be careful when you change the oven

lamp. There is a risk of electrical shock.

Before you change the oven lamp:

• Deactivate the oven.
• Remove the fuses in the fuse box or deactivate the

circuit breaker.

Put a cloth on the bottom of the oven to prevent
damage to the oven light and glass cover.

1. Turn the glass cover counterclockwise to remove

it.

2. Clean the glass cover.
3. Replace the oven light bulb with an applicable 300

°C heat-resistant oven light bulb.
Use the same oven lamp type.

4. Install the glass cover.

Cleaning the oven door

The oven door has two glass panels. You can remove
the oven door and the internal glass panel to clean it.

The oven door can close if you try to remove the
internal glass panel before you remove the oven

door.

Caution!

 Do not use the appliance without the

glass panels.

1

 Open the door fully

and hold the two door
hinges.

2

 Lift and turn the lev-

ers on the two hinges.

3

 Close the oven door

to the first opening posi-
tion (halfway). Then pull
forward and remove the
door from its seat.

4

 Put the door on a soft

cloth on a stable surface.

5

 Release the locking

system to remove the in-
ternal glass panel.

90°

6

 Turn the two fasten-

ers by 90° and remove
them from their seats.

13