Spate cleaner TANKO-SF
3 Construction and FunctionTranslation of the original Operating / Installation Instructions 2016/09 Rev.1 15/63
Aggressive agents can reduce the service life of the device.
Designation
TANKO-SF
Range:
-
Cleaning radius
-
Wetting radius
1 m (3.3 ft)
1.5 m (4.9 ft)
Operating pressure:
–
Cleaning agent
–
Optimum pressure range
1 – 3 bar (14.5 – 44 psi)
2 bar / 29 psi
Operating temperature (permitted):
–Cleaning agent
max. +95 °C (+203 °F)
Ambient temperature (permitted):
- Inside the container
min. +5 °C (+41 °F)
max. +140 °C (+284 °F)
Volume flow rate / flow:
Media connection [MC]
see
Sound pressure level:
–
Outside the container
Depends on the properties of the container!
It is not to be expected that the noise pressure level will exceed
the maximum permitted exposure value of LE
X,8h
= 85 dB(A)
during operation (see
section 6.1
Surface roughness:
–
Standard
–
optional
R
a
≤
0.8 µm (32 µin)
R
a
≤
0.5 µm (20 µin) (electropolished)
Materials:
1.4435 (AISI 316L), 1.4430 (AISI 316L),
TECAPEEK natural, 70 EPDM 291
Weight:
0.11 kg
Installation opening:
See
section 5.2.1
Installation position:
See
section 5.2.2
Table 3.3-1: Technical Data of the Device
