Spate cleaner TANKO-SF
6 Commissioning
Translation of the original Operating / Installation Instructions 2016/09 Rev.1 29/63
6
Commissioning
Before the device is commissioned in Germany, the user of the plant must adhere to the Industrial
Safety Regulation (BetrSichV).
In other countries, the respective national directives, statutes and country-specific regulations regarding
occupational safety and accident prevention are to be complied with.
WARNING
Hazardous situations when commissioning as a result of incorrect installation of the device!
There is a risk of death or severe physical injuries.
As a basic rule, commissioning of the device (with cleaning agent) must not be
performed until the following has been checked:
–
Correct mechanical installation of the device on / in the container
–
The safe and reliable functioning of the device
6.1
Safety Notes for Commissioning
Before the device is commissioned, the operating company must ensure that local regulations are
observed during commissioning.
We recommend that you document the commissioning in a report.
WARNING
Risk of burns from hot surfaces!
The device is supplied without additional measures to provide protection from hot surfaces.
The device may heat up significantly as a result of the cleaning fluid or the heat transfer
from the container. Contact with the device can cause burns on the skin.
There is a risk of burns from cleaning agent at temperatures of more than +60 °C / +140 °F.
Insulate hot surfaces.
Secure hot surfaces with a guard or barriers.
Put up warning signs in the direct vicinity of the hot surfaces.
Use protective work clothing and protective gloves when working.
WARNING
Danger resulting from negative pressure/vacuum in the container!
A cold cleaning process in hot enclosed containers can generate negative pressure,
which may lead to damage to the container.
There is a risk of death or severe physical injuries.
Take precautions to allow gases or vapors to escape during operation
(e.g. install devices for ventilation).
