LabLynx User Manual Revision 1.1 2/18/2021
9
Setup
The LabLynx communicates wirelessly with a PC running Cheetah. A standard LabLynx
license for Cheetah is non-transferrable. Your LabLynx license only allows use of
Cheetah with a LabLynx. If you purchased your LabLynx with a PC, your system would
be pre-configured. If you already own a standard Neuralynx Cheetah license, the
LabLynx can be used with Cheetah. The LabLynx requires Cheetah 6.4 or later.
LabLynx supports up to 256 channels. The number of channels that can be viewed and
recorded in Cheetah depends on the Cheetah license.
If you need to change the order of acquisition channels or reduce the number of channels
recorded, see section
4.6 Channel Mapping and Channel Masking
Electrostatic Sensitive Equipment
All Neuralynx equipment is sensitive to electrostatic discharge (ESD) and should be
handled appropriately. Always wear a static wrist strap and use appropriate ESD
measures when handling any electronics. If you have questions, please contact Neuralynx
for more information.
