8
Co
nn
ec
ti
n
g
po
we
r
Connecting power
Connect the power adaptor to the DC-
in socket on the rear panel of the
Recorder 2. Plug the other end of the
adaptor into a power outlet
.
Turning on the Recorder 2
Once the Recorder 2 is plugged in, the green power LED turns on.
Press the
button on the remote and the system turns on. Press
the
button again to turn off the Recorder 2.
Note: the green light will remain on even if the Recorder 2 is
turned off, as long as the unit is connected to a power outlet.
MPEG-4 Video Recorder_UM_EN.book Page 8 Monday, June 19, 2006 8:22 PM