Neuton P
OWER
E
QUIPMENT
7 5 M E I G S R O A D , V E R G E N N E S , V E R M O N T 0 5 4 9 1
www.neutonpower.com
©2011 Neuton Power Equipment 286501A
Daily Checklist, Cleaning and Storing for your NEUTON Battery-Powered Blower
To help maintain your NEUTON Blower for optimum performance, we recommend you follow this checklist each time you use your Blower.
Do not insert the Battery Pack until you have completed all of the daily checks.
[ ]
BATTERY PACK: Make sure the Battery Pack has a full charge.
[ ] INSPECT: Before inserting the Battery Pack, inspect for any visible damage to the Blower Tubes or Motor Housing. Inspect the air intake
and clean it to remove any debris.
Make sure the paddle ON/OFF Switch is in the OFF position (left side).
[ ] NOISES: If you notice anything unusual, such as a vibration or odd sound, shut the Blower OFF immediately. Remove the Battery Pack
and check the Blower for any obstructions.
If you cannot find the cause of the problem or are uncertain what to do, then have the Blower inspected by a qualified repair
shop before using it or visit our website at
www.neutonpower.com
.
•
Remove the Battery Pack and allow the Blower to cool for at least five (5) minutes before servicing or storing.
•
If you drop the Blower, carefully inspect it for damage. If the Battery is damaged, Blower Tube(s) is broken, Housing cracked, or Handle
broken or if you see any other condition that may affect the Blower's operation, visit our website at
www.neutonpower.com
or call
Neuton Power Equipment Toll Free at:
1-866-NEUTON1 (638-8661)
for assistance before putting it back into use.
Cleaning the Blower
Use only mild soap and a damp cloth to clean the Blower. Never let any liquid get inside the Blower Housing and NEVER immerse any part
of the Blower Housing into a liquid.
Storing
[ ] Always store the Blower with a full Battery Pack charge.
[ ] Do not store the Blower near chemicals, such as fertilizers, organic or other solvents. Do not expose brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., to the plastic parts of the Blower. These products are often highly corrosive and may cause
permanent damage, weaken, or destroy the plastic to your Blower.
[ ] When not in use, your NEUTON Battery-Powered Blower should be stored indoors in a dry and high or locked-up place, out of reach of
children.
[ ] For superior Battery Pack performance, always store the Battery Pack and Charger in a
DRY
environment with temperatures
between 32ºF (0ºC) and +80ºF (+26.7ºC). Storing above +80 ºF can cause Battery Pack leakage, rust, or degradation of the Battery
Pack performance. The lower the storage temperature is within the specified range, the better. The Battery Pack will discharge
more slowly at low temperatures. Charge the Battery Pack for 30-60 minutes, until fully charged, prior to storage and then every
one (1) to two (2) months; and then again prior to the first seasons use. To prevent permanent damage to the Battery Pack, never
store it in a discharged condition. Be sure to remove the Battery Pack from the Charger after charging. In addition, you can safely
keep the Battery Pack in your tool when storing for the long term.
Do not store the Battery Pack near children or pets, with metal objects that could short circuit the terminals, or close to a source of
heat, sparks, open flame or on the floor as it may be damp or subject to accidental flooding. In addition, never expose the Battery
Pack to abnormal shaking or shocks. Regularly observe the external appearance of the Battery Pack. Never use a Battery Pack that
shows cracks, changes shape, or obviously damaged.
Copyrights and Trademarks
©
2011 Neuton Power Equipment, a division of Country Home Products
NEUTON and NEUTON logo are trademarks of Country Home Products
All rights reserved.
Documentation
Produced in China
for Neuton Power Equipment